Freza de imbinat in dinti pe lat lemn cu grosime de 60 mm cu dinti micro

Note: actual product colours may vary slightly from the images, depending on monitor settings and photo lighting.

Vatzo

Lamelar Latitudinal Wood Joint Router Bit 60 mm | D100 | d32 | Code - C02 | DS Steel

€76,95 incl. VAT

-27% ~~€104,95~~ €76,95 incl. VAT

Only 1 left

Limited stock

Dimensions

60 mm

Free technical advice

Not sure which tool or accessory you need? Send us a photo, a sketch or your machine model – we'll help you choose.

Free delivery in Romania over 600 lei

100% secure payments

Professional quality

Got questions?

Lamellar Edge-Joint Cutter – DS Steel | 5 mm Depth

Bore-type cutter with a heat-treated steel body and oxide finish, brazed with DS Steel inserts, designed for making lamellar (finger-profile) joints between solid wood boards or panels. The teeth cover the entire working width, with a profile depth of 5 mm and a pitch of 6 mm between tooth tips, for a generous contact surface and a strong joint. Available in 8 different working widths — select the variant from the menu.

Outer Diameter (D)	Outer Diameter (D)According to the technical drawing of the selected variant
Bore (d)	Bore (d)Ø32 mm standard, with 2 reduction bushings for Ø30 mm included
Working Width (Variants)	Working Width60 / 80 / 84 / 90 / 100 / 120 / 132 / 156 mm – select from menu
Tooth Profile Depth	Profile Depth5 mm – teeth over the entire working width
Tooth Pitch	Tooth Pitch6 mm (measured tip to tip)
Number of Teeth	Number of TeethZ4 (4 pieces)
Cutting Material	Cutting MaterialDS Steel inserts (standard joinery steel) – 58–61 HRC
Construction Type	Construction TypeHeat-treated steel body; brazed with replaceable DS Steel inserts
Body Finish	Body FinishBlack oxide – additional corrosion protection
Recommended Speed	Speed6,000 RPM
Country of Origin	Country of OriginUkraine

✨ FEATURES AND PERFORMANCE:

8 Working Widths Available: from 60 mm to 156 mm, covering almost any panel or board thickness used in furniture and solid wood structures.
Precise and Strong Joints: teeth with 5 mm depth and 6 mm pitch increase the glue contact surface, ensuring uniform bonding and superior mechanical fixing.
Efficient Economical Solution: DS Steel inserts are the rational option for small workshops, small-batch production or joinery work that needs a reliable tool without a high purchase cost.
Universal Bore with Bushings Included: Ø32 mm standard, with 2 reduction bushings for Ø30 mm included — immediate compatibility with both spindle sizes.
Treated and Oxidized Body: increased corrosion resistance and a professional look, with replaceable inserts for a long-term investment.

⚠️ USAGE LIMITATIONS (DS STEEL):

❌ NOT recommended for chipboard, MDF, HDF or exotic wood! Intended exclusively for natural softwood (conifers, lime, etc.).
For industrial volumes or hardwood, choose the superior HSS M2 or HW (K40) variants.
Ideal for: joinery workshops, solid wood furniture and softwood-based projects.

📊 MATERIAL COMPATIBILITY (DS STEEL)

Softwood (Fir, Spruce, Pine, Lime) 90%

Good / economical: solid results on softwoods, the ideal low-cost option.

Hardwood (Beech, Oak, Ash) 40%

Weak: rapid dulling of the inserts on hardwoods – we recommend HSS M2 or HW (K40) for this case.

Chipboard / MDF / HDF / Composite Not recommended

Synthetic binders prematurely wear the DS Steel inserts.

💡 Conclusion: working on standard fir or spruce structures? The DS Steel variant is the perfect choice cost-wise. For hardwoods or large industrial volumes, superior HSS M2 and HW (K40) variants are available in our catalog.

🦺 SAFETY MEASURES:

Mandatory protective equipment: safety glasses (flying chips), mask or respirator filter (fine wood dust) and hearing protection for prolonged work.
Mind your hands and fingers: use push sticks and guides when machining; do not guide the workpiece by hand near the cutter.
Check the mounting of the cutter and reduction bushings on the spindle, and that the nut is fully tightened before starting.
Observe the recommended speed (6,000 RPM) to avoid vibration or insert damage.
Do not force the feed on hardwoods — DS Steel inserts dull quickly under excessive pressure; reduce the feed rate or choose another cutter material.

Country/region