Set de freze pentru lambriu cu profil rotunjit, placate cu carbură HSS, pentru lemn de 12–18 mm
Set de freze pentru lambriu cu profil rotunjit, placate cu carbură HSS, pentru lemn de 12–18 mm

Note: actual product colours may vary slightly from the images, depending on monitor settings and photo lighting.

SolGrat

Set of 5 Round Profile Tongue and Groove Router Bits D140 | d40 | 12 - 18 mm - 14.03.9UR HSS

SKU: 14.03.9UR-d40
€148,95 incl. VAT
-29% €209,95 €148,95 incl. VAT
Only 4 left
Limited stock
Free technical advice

Not sure which tool or accessory you need? Send us a photo, a sketch or your machine model – we'll help you choose.

Free delivery in Romania over 600 lei
100% secure payments
Professional quality

Got questions?

We're here to help

Ask a specialist!

Email +40 756 733 343

Professional Set for Softline Paneling with 10 mm Shadow Gap

Product Type Set of modular cutters for premium rounded paneling production
Joint Profile Rounded Model (Softline Radius) with flat spacer
Shadow Gap Generated at 10 mm width (Ensures 3D effect and conceals the joint)
Thickness Capacity Fully adaptable for thin or thick paneling profiles (12 - 18 mm range)
Outer Diameter (D) 140 mm
Set Architecture Modular 3+2 cutter system: Special configuration for easy sharpening and precise profiling
Blade Material / Type HSS M2 (High-Speed Steel enriched with 6.5% Tungsten)
Construction Type Industrially brazed profiled inserts on a rigid structural treated steel body
Blade Hardness 63–65 HRC (Clean, super-sharp cut, no torn fibers)
Standard Spindle Bore (d) Ø40 mm (Ideal for 4-sided moulders or spindle moulders)
Spindle Compatibility The system allows mounting on Ø30 mm or Ø35 mm spindles using reduction bushings
Country of Production Ukraine

DYNAMIC PROPERTIES AND PERFORMANCE

  • 10 mm Shadow Gap for Premium Design: The special geometry of these cutters creates a perfectly straight, flat step of 10 mm width at the joint. This design detail creates a pronounced "shadow joint," giving the paneling a modern, three-dimensional architectural look, while masking the natural expansion and contraction of the wood.
  • Smart Modular 3+2 Cutter System: Due to the technical complexity involved in the curved profile combined with the straight step, the set has been structurally segmented into a group of 5 independent cutters (3 pieces on one side and 2 pieces on the other side). This architecture offers an enormous practical advantage for maintenance, allowing extremely simple and quick sharpening of each radius on the face of the teeth, completely eliminating the specific blockages of monoblock cutters.
  • Fluid Adjustment for Thin or Thick Paneling: The segmented design eliminates the constraints of fixed dimensions. By simply repositioning and sliding the two cutter subassemblies on your machine's spindle, you can easily switch from cutting thin 12 mm paneling to massive 20 mm thick elements, while keeping the 10 mm finish perfectly calibrated.
  • Professional HSS M2 High-Speed Steel Blade: The industrially brazed inserts on the tool body are made of HSS M2 (6.5% W). High-speed steel allows for a significantly finer cutting edge than carbide, cleanly cutting wood fibers and leaving the curved surface perfectly smooth, almost completely eliminating sanding time.

⚠️ Operating guide based on material:

✅ Ideal Use: Natural softwoods (Spruce, Fir, Pine, Linden) and hardwoods (Beech, Oak, Ash).

❌ Prohibited for use on chipboard, MDF, HDF, composites, or agglomerated materials (causes instant wear of the HSS blade)!

🛠️ Professional Selection Guide: HSS M2 vs. HW (K40)

Choosing the correct material directly influences machine efficiency and finish quality. Consult the technical differences below:

Processed Material HSS M2 ⭐
(Choice for this set) 		HW (K40)
(Carbide)
Natural Softwood
(Spruce, Fir, Pine, Linden) 		⭐ 100%
(Glossy Finish / No torn fibers)		 80%
(Medium risk of burns with slow feed)
Natural Hardwood
(Oak, Beech, Ash, Hornbeam) 		80%
(Clean cut / Requires more frequent sharpening)		 ⭐ 100%
(Maximum resistance to mechanical wear)
MDF / Chipboard / HDF / Agglomerates Forbidden / Not recommended ⭐ 100%
(Optimal for synthetic adhesives)
Cutting Edge Quality Maximum (Extremely fine/sharp edge for radii) Standard (Chipping by structural impact)
Active Layer Hardness 63–65 HRC 85 – 92 HRC

✅ Technical recommendations for assembly and use:

  1. Thickness Versatility: The set offers you full control in the workshop, allowing you to cut fine or thick paneling (between 12 and 20 mm) intended for interior cladding or ventilated facades with a groove/blockhouse design.
  2. Machine Integration: Natively designed for industrial Ø40 mm spindles used on 4-sided moulders. It can be safely used on a classic spindle moulder (Ø30 or Ø35 mm spindle) by using professionally centered reduction rings or bushings.
  3. Maintenance: Dividing the cutting group into subassemblies of 3 and 2 cutters significantly eases the periodic resharpening operation on the teeth's face, protecting the perfectly calibrated 10 mm shadow profile and massively extending the tool's lifespan.

Delivery in 24–48 working hours for in-stock products, by courier (Fan Courier, Sameday, Cargus, DPD, GLS).

Free delivery in Romania for orders over 600 lei. We also ship to the EU, Moldova and Ukraine – the cost is calculated at checkout. Details in our Shipping policy.

This product is covered by the legal guarantee of conformity of at least 2 years, under EU and Romanian law. If the product does not match its description or does not work as intended, you are entitled to free repair or replacement and, in some cases, a price reduction or refund.

See the EU notice on the legal guarantee · europa.eu/youreurope – guarantees

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)