Note: actual product colours may vary slightly from the images, depending on monitor settings and photo lighting.

Vatzo

Finger Joint Cutter (Longitudinal) 50 - 118 mm | Code C11 | DS Steel

SKU: C11H55.8-d32
€135,95 incl. VAT
Only 1 left
Limited stock
Thickness (B) x Bore (d)
Free technical advice

Not sure which tool or accessory you need? Send us a photo, a sketch or your machine model – we'll help you choose.

Free delivery in Romania over 600 lei
100% secure payments
Professional quality

Got questions?

We're here to help

Ask a specialist!

Email +40 756 733 343

Longitudinal Finger Joint Cutter for End Grain – DS Steel or HSS M2 | 50–130 mm

Bore-type cutter for making longitudinal finger joints on the ends of solid wood elements. The profile increases the contact surface for the adhesive, creating a strong and perfectly flat mechanical bond. Available in DS Steel and HSS M2 versions, with working thicknesses from 50 mm to 130 mm — select the material and size from the menu.

Bore (d) Bore (d)Ø32 mm standard, with reduction bushings for Ø30 mm included | Ø35 or Ø40 mm on request
Working Thickness (B) Working Thickness50 – 130 mm – select the size from the menu
Cutting Edge Material Cutting Edge MaterialDS Steel (calibrated woodworking steel) | HSS M2 (6.5% tungsten) – select the version
Cutting Edge Hardness Cutting Edge HardnessDS Steel – 58–61 HRC | HSS M2 – 63–65 HRC
Minimum Material Thickness Minimum Thickness~10 mm, thanks to teeth across the entire active surface
Outer Diameter (D) Outer Diameter (D)According to the technical drawing of the selected version
Number / Type of Teeth TeethZ4 (4 pieces), brazed
Recommended Speed Speed6,200 RPM
Cutting Inserts Cutting InsertsBrazed, can be resharpened repeatedly; can be re-brazed when heavily worn
Country of Origin Country of OriginUkraine

✨ FEATURES AND PERFORMANCE:

  • Edge-to-Edge and End Grain Joints: the longitudinal finger joint profile considerably increases the contact surface for the adhesive, creating a strong and perfectly flat mechanical bond.
  • Teeth Across the Entire Active Surface: the continuous configuration allows precise machining of complementary profiles on thin pieces, from ~10 mm up to the maximum thickness of the chosen version.
  • Full Size Range (50–130 mm): select exactly the working thickness your project needs, without compromises or extra adjustments.
  • 2 Materials, 2 Investment Levels: DS Steel for low cost on softwood, HSS M2 for a superior finish and longer service life.
  • Bore with Bushings Included: Ø32 mm standard, with Ø30 mm reduction bushings included — immediately compatible with both spindle sizes.
  • Long-Term Investment: the inserts can be resharpened repeatedly; when heavily worn, the cutter body can be re-brazed.

⚠️ USAGE LIMITATIONS:

  • DS Steel version: ❌ NOT recommended for chipboard, MDF, HDF or very dense exotic wood — intended exclusively for natural softwood.
  • HSS M2 version: ❌ NOT recommended for chipboard, MDF, HDF or very hard exotic wood — the synthetic binder prematurely wears the high-speed steel edge.
  • For composite materials or large industrial volumes: contact us for the equivalent HW (K40) version made to order.

🛠️ SELECTION GUIDE: DS STEEL vs. HSS M2

The right material choice directly affects finish quality, cost and tool life (swipe left-right on mobile to see the full table):

Material Processed DS Steel
(Economy) 		HSS M2 ⭐
(6.5% tungsten)
Softwood
(Fir, Spruce, Pine, Linden) 		90%
(Good / Economical)		 ⭐ 100%
(Clean finish, no burns)
Hardwood
(Beech, Oak, Ash) 		40%
(Frequent sharpening)		 80%
(Efficient and stable)
MDF / Chipboard / HDF / Composite Not recommended Not recommended
Number of Resharpenings Standard Maximum (M2 resharpenable)
Cutting Edge Hardness 58 – 61 HRC 63 – 65 HRC
✅ Practical buying conclusions:
  1. Working standard structures in Fir, Spruce or Pine on a tight budget? The DS Steel version is the smart choice — excellent profiling for joining softwood elements, with a quick return on investment.
  2. High workload or harder species? The HSS M2 version gives a superior finish and more resharpenings, being more wear-resistant.
  3. Need to mill board materials (MDF/chipboard)? Neither version is recommended — contact us for the HW (K40) version made to order.

🦺 SAFETY MEASURES:

  • Mandatory protective equipment: safety glasses, dust mask or respirator (fine wood dust) and hearing protection for prolonged work.
  • Check the mounting of the cutter and bushings on the spindle, and that the nut is fully tightened before starting.
  • Observe the recommended speed of 6,200 RPM to avoid vibration or damage to the cutting edge.
  • Do not force the feed on hardwoods — especially with the DS Steel version, the inserts dull quickly under excessive pressure.
  • Resharpening: we recommend a specialised service centre to preserve the original profile geometry.

Delivery in 24–48 working hours for in-stock products, by courier (Fan Courier, Sameday, Cargus, DPD, GLS).

Free delivery in Romania for orders over 600 lei. We also ship to the EU, Moldova and Ukraine – the cost is calculated at checkout. Details in our Shipping policy.

This product is covered by the legal guarantee of conformity of at least 2 years, under EU and Romanian law. If the product does not match its description or does not work as intended, you are entitled to free repair or replacement and, in some cases, a price reduction or refund.

See the EU notice on the legal guarantee · europa.eu/youreurope – guarantees

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Order several variants

Variant Quantity Price Total
Finger Joint Cutter (Longitudinal) 50 - 118 mm | Code C11 | DS Steel
50 mm x d32/30 C11H50-d32
€127,95 incl. VAT
€0,00
Out of stock
€127,95 incl. VAT
€0,00
Finger Joint Cutter (Longitudinal) 50 - 118 mm | Code C11 | DS Steel
55.8 mm x d32/30 C11H55.8-d32
€135,95 incl. VAT
€0,00
€135,95 incl. VAT
€0,00
View cart
0 Total items
€0,00

Product subtotal