Freza reglabila pentru imbinare lemn lamelar latitudinal 50-120 mm Solgrat C04 DS Steel

Set freze din otel pentru imbinari dințate si panouri masive groase C04 DS Steel

Note: actual product colours may vary slightly from the images, depending on monitor settings and photo lighting.

Vatzo

Lamelar Latitudinal Wood Joint Router Bit 60 mm | D100 | d32 | Code - C02 | DS Steel

SKU: C04B50DS-d32

€113,95 incl. VAT

Only 1 left

Limited stock

Dimensions x Bore (d)

50 mm - d32/30

Free technical advice

Not sure which tool or accessory you need? Send us a photo, a sketch or your machine model – we'll help you choose.

Free delivery in Romania over 600 lei

100% secure payments

Professional quality

Got questions?

Width Finger-Joint (Lamellar) Cutter for Countertops – DS Steel | Depth 4 mm

Bore-type cutter with a heat-treated steel body and oxidized finish, brazed with DS Steel inserts, designed for lamellar edge-to-edge (width) jointing of solid wood boards — ideal for countertops and glued panels. The teeth cover the entire working surface, with a profile depth of 4 mm and a pitch of 4 mm between tooth tips, for a generous gluing surface and a strong joint. Available in 7 working widths — select the variant from the menu.

Outer Diameter (D)	Outer Diameter (D)According to the technical drawing of the selected variant
Bore (d)	Bore (d)Ø32 mm standard, with 2 reducing bushes for Ø30 mm included
Working Width (Variants)	Working Width50 / 60 / 72 / 80 / 92 / 100 / 120 mm – select from the menu
Tooth Profile Depth	Profile Depth4 mm – teeth across the entire working surface
Tooth Pitch	Tooth Pitch4 mm (tip to tip)
Number of Teeth	Number of TeethZ4 (4 pieces)
Cutting Edge Material	Cutting Edge MaterialDS Steel inserts (standard joinery steel) – 58–61 HRC
Construction Type	Construction TypeHeat-treated steel body; brazed DS Steel inserts
Body Finish	Body FinishBlack oxide (bluing) – additional corrosion protection
Recommended Speed	Speed6,000 RPM
Country of Origin	Country of OriginUkraine

✨ FEATURES AND PERFORMANCE:

7 Working Widths Available: from 50 mm to 120 mm, covering almost any board or panel thickness used in furniture and solid wood construction.
Precise and Strong Joints: teeth with 4 mm depth and 4 mm pitch increase the glue contact surface, ensuring even bonding and superior mechanical hold.
Efficient Economical Solution: DS Steel inserts are the rational option for small workshops, small-batch production or joinery work that needs a reliable tool without a high purchase cost.
Universal Bore with Bushes Included: Ø32 mm standard, with 2 reducing bushes for Ø30 mm included — immediate compatibility with both spindle sizes.
Treated and Oxidized Body: increased corrosion resistance and a professional look.

⚠️ LIMITATIONS IN USE (DS STEEL):

❌ NOT recommended for chipboard, MDF, HDF or exotic wood! Intended exclusively for natural softwood (conifers, lime, etc.).
For industrial volumes or hardwood, choose the superior HSS M2 or HW (K40) variants.
Ideal for: joinery workshops, solid wood countertops and furniture, softwood-based projects.

📊 COMPATIBILITY BY MATERIAL TYPE (DS STEEL)

Softwood (Fir, Spruce, Pine, Lime) 90%

Good / economical: solid results on softwoods, the ideal low-cost option.

Hardwood (Beech, Oak, Ash) 40%

Poor: inserts dull quickly on hardwoods – we recommend HSS M2 or HW (K40) for this case.

Chipboard / MDF / HDF / Composite Not recommended

The synthetic binder prematurely wears the DS Steel inserts.

💡 Conclusion: working on standard fir or spruce pieces? The DS Steel variant is the perfect choice cost-wise. For hardwoods or large industrial volumes, HSS M2 and HW (K40) variants are available in our catalogue.

🦺 SAFETY MEASURES IN USE:

Mandatory protective equipment: safety glasses (flying chips), mask or respirator filter (fine wood dust) and ear protection for prolonged work.
Mind your hands: use push sticks and guides; never guide the workpiece by hand close to the cutter.
Check the clamping of the cutter and bushes on the spindle, and that the nut is fully tightened before starting.
Observe the recommended speed (6,000 RPM) to avoid vibration or damage to the inserts.
Do not force the feed on hardwoods — DS Steel inserts dull quickly under excessive pressure; reduce the feed rate or choose another material variant.

Country/region