115 Products
All SolGrat bore shaper cutters in one collection: profiled cutters for furniture, doors, raised panels, cladding, groove and rebate, joints and decorative profiles. They fit vertical-spindle moulders and 4-sided moulding machines, with a standard Ø30 mm bore (Ø32 or Ø40 mm on some models) and reducing bushings for other spindles.
The tips are brazed onto a heat-treated, dynamically balanced steel body and can be resharpened several times at a specialised service centre. For a full comparison of the materials, see our guide DS Steel, HSS M2 or Carbide (HW)? How to choose your cutter material.
The standard is Ø30 mm. Some models have a Ø32 or Ø40 mm bore – the exact size is shown in each product title and specification. For other spindle sizes, use reducing bushings and spacer rings.
They fit the vertical-spindle moulder (stationary shaper) and 4-sided moulding machines. They do not fit hand routers or collet-type CNC machines – for those you need shank router bits.
The larger the cutter diameter, the lower the speed. The recommended speed is listed in each product specification – for example, D160–D200 mm panel raising cutters run at about 6,000 rpm. Never exceed the maximum speed marked on the cutter body.
HSS M2 for softwood (fir, spruce, pine) – bright finish, no burning, lower price. HW (K40) for oak, beech, ash, MDF, particleboard and daily production – lasts several times longer. For softwood in low volumes, DS Steel is the most economical option.
Yes. Brazed tips can be resharpened several times at a specialised service – carbide tips only with a diamond wheel. When heavily worn, the cutter body can be re-tipped with new inserts.
Yes, we make bore cutters to your technical drawing or profile sample. Send us the drawing or a photo of the profile at office@solgrat.com or call +40 756 733 343.