1 5

Hand-Held Circular Saw 1100W – ROTOR RCC1100 | Disc 185 mm

Hand-Held Circular Saw 1100W – ROTOR RCC1100 | Disc 185 mm

12992

210,00 RON
210,00 RON
Sale Sold out
Taxes included. Shipping calculated at checkout.

Low stock: 1 left

1100W Handheld Circular Saw – ROTOR RCC1100 | 185 mm Blade

The ROTOR RCC1100 handheld circular saw is a reliable partner for any woodworking, construction, or interior design project. Equipped with an 1100 W motor and a speed of 4,500 RPM, it provides fast and effortless cutting in solid wood, OSB boards, melamine-faced chipboard, MDF, and wooden beams. The stable guide shoe allows for straight, longitudinal, cross, and bevel cuts up to 45°, with fine depth adjustment for clean edges and precise dimensions.

Power Supply Power Supply230 V / 50 Hz
Motor Power Motor Power1100 W
Blade Diameter Blade Diameter185 mm
Arbor Diameter Arbor Diameter20 mm
No-Load Speed No-Load Speed4,500 RPM
Bevel Capacity Bevel Capacity0° – 45°
Depth Adjustment Depth AdjustmentFine adjustment system, adjustable according to material thickness
Parallel Guide Parallel GuideIncluded
Usage UsageSolid wood, chipboard, MDF, OSB, plywood, carpentry
Manufacturer ManufacturerROTOR

✨ KEY ADVANTAGES:

  • Excellent Power-to-Maneuverability Ratio: The 1100 W motor provides an ideal balance between cutting force and low tool weight — easy control even during prolonged use.
  • Cutting Versatility: Rapid adjustment of cutting depth and bevel angle (0°–45°) makes it easy to switch from straight cuts to miter joints.
  • Operational Safety: Automatic retractable lower guard and ergonomic non-slip handle for a firm grip during operation.
  • Parallel Guide Included: Precise longitudinal cuts without additional accessories, ideal for repetitive cuts of the same width.

💡 WORKSHOP TIP – WHICH BLADE TO CHOOSE:

  • Carpentry and Fast Cuts (beams, rough planks): 24-tooth (24T) blade — quick sawdust ejection, aggressive feed.
  • Melamine-faced Chipboard or Countertops (without chipping the edge): fine 185 mm blade with 40 or 60 teeth (40T/60T) — clean finish, no splintering on the visible surface.

🦺 SAFETY MEASURES FOR USE:

  • Mandatory protective equipment: safety glasses, ear protection for prolonged use, and a mask against fine wood dust.
  • Check the lower blade guard before each use — it must freely return to the closed position.
  • Firmly secure the workpiece before cutting — do not hold the workpiece only with your free hand while cutting.
  • Unplug the tool before changing the blade or adjusting the cutting depth/angle.
  • Use the correct blade for the material — an unsuitable blade can cause kickback or a poor quality cut.
View full details