• Freza pentru maner mobila de 18 mm cu adancitura raza 5 mm pentru degete pentru lemn esenta moale si tare
  • Freză profesională HSS M2 pentru profile de mâner integrat în uși din lemn masiv, brad sau stejar.
  • Freza pentru maner mobila de 18 mm cu adancitura raza 5 mm pentru degete pentru lemn esenta tare sau mdf si pal
1 3

Pull Handle Router Bit for Integrated Furniture Handle – HSS M2 / T.C.T. Vidia

Pull Handle Router Bit for Integrated Furniture Handle – HSS M2 / T.C.T. Vidia

M1F160x18

510,00 RON
510,00 RON
Sale Sold out
Taxes included. Shipping calculated at checkout.
Inserts x Bore (d)

Out of stock

Furniture Pull Handle Router Bit (Pull Handle Type) – HSS M2 or T.C.T. Vidia

Profiled router bit for creating ergonomic handles directly into the structure of cabinet or drawer fronts – the ideal solution for modern minimalist furniture without applied metal handles. Available in several profile models (see attached technical drawings), in HSS M2 and T.C.T. Vidia variants. All models are available from stock – select the desired model and variant from the menu.

Outer Diameter Outer DiameterAccording to the technical drawing of the selected model
Active Working Space Active Working SpaceAccording to the technical drawing of the selected model
Bore (d) Bore (d)Ø30 mm standard | Ø35 mm or Ø40 mm available for pre-order
Cutting Edge Material Cutting Edge MaterialHSS M2 – 4 silver-brazed inserts (Ag) | T.C.T. Vidia – 4 carbide inserts brazed with brass alloy (Cu-Zn)
Cutting Edge Hardness Cutting Edge HardnessHSS M2 – 64–66 HRC | T.C.T. Vidia – 85–92 HRC
Recommended RPM Recommended RPM6,000 RPM
Cutting Inserts Cutting InsertsBrazed, successively resharpenable at a specialized center; in case of advanced wear, the router bit body can be re-brazed
Available Models Available ModelsSeveral standard profiles from stock – see attached technical drawings for the geometry of each model
Machine Compatibility Machine CompatibilityStationary table router and CNC with moderate feed
Package Contents Package Contents1 x Router Bit (selected model and variant)
Country of Origin Country of OriginUkraine

💎 WHY CHOOSE THIS ROUTER BIT:

  • Integrated Handles, No Metal Accessories: the profile is made directly into the edge of the cabinet or drawer front, eliminating the need for applied handles – clean, minimalist, modern design.
  • Profile Versatility: available in several geometry models from stock – see attached technical drawings to choose the right profile for your project.
  • Can be used along the entire length of the edge or only on a defined section of the front.
  • Dynamic Balance: the router bit body is precisely machined to eliminate vibrations, protecting the machine's bearings.
  • Long-Term Investment: the inserts can be resharpened, and in case of advanced wear, the router bit body can be re-brazed.

💡 Usage tip: for an impeccable result on hardwoods or MDF, we recommend a constant feed and, where applicable, a 0.5 mm finishing pass.

⚠️ LIMITATIONS IN USE:

  • HSS M2 variant: ❌ not recommended for particleboard, MDF, HDF or very hard exotic wood – the synthetic binder prematurely wears the high-speed steel cutting edge.
  • T.C.T. Vidia variant on soft wood: requires constant feed – stopping in rotation on resinous woods can cause local burns.

🛠️ SELECTION GUIDE: HSS M2 vs. T.C.T. VIDIA

The choice of material directly influences the quality of the finish and the tool's lifespan (swipe left-right on mobile to see the complete table):

Processed Material HSS M2 Premium
(6.5% W / P6M5) 		T.C.T. Vidia ⭐
(Cemented Carbides)
Soft Wood
(Spruce, Fir, Pine) 		⭐ 100%
(No Burns)		 ❌ Risk of burning
(Constant feed mandatory)
Hard Wood
(Beech, Oak, Ash) 		80%
(Efficient)		 ⭐ 100%
(Resistant)
MDF / Particleboard / HDF / Melamine Not Recommended ⭐ 100%
(Optimal)
Exotic Wood / Composites Prohibited ⭐ 100%
(Maximum)
Knots in Wood ✅ Resistant
(HSS absorbs shock) 		⚠️ Risk of chipping
(carbide is hard, but fragile to shock)
Active Insert Thickness 6 mm (Maximum) 3 mm
Cutting Edge Hardness 64 – 66 HRC 85 – 92 HRC
💡 Conclusions for purchase:
  1. Working with Spruce, Fir, or Pine? Choose HSS M2 – immaculate white finish, no burn marks, resistant to knots.
  2. Working with Oak, Beech, MDF, or melaminated particleboard? Choose T.C.T. Vidia – resists abrasive wear and ensures clean edges on derived materials.
  3. Which model to choose? Consult the attached technical drawings to compare the available geometries and select the appropriate profile for your furniture front.

🦺 SAFETY MEASURES IN USE:

  • Mandatory protective equipment: safety glasses (flying chips), mask or respirator (fine wood/MDF dust), and ear protection for prolonged work.
  • Beware of hands and fingers: use guides and feed/push devices; do not manually guide the workpiece near the router bit.
  • Check the router bit's fixation on the spindle and the nut's complete tightening before starting.
  • Observe the recommended speed of 6,000 RPM.
  • Resharpening: we recommend resharpening at a specialized center to maintain the original profile geometry of the handle.
View full details