• Freza pentru tablie usi cu adancime de 55 mm pentru esenta moale si tare cu profil usor rotund simplu de slefuit, freza avand rotatie spre dreapta
  • Freza tablie mobila 45 mm HSS cu un profil smecher neted pentru lemn esenta moale sau tare
  • Freza tablie mobila 45 mm HSS cu un profil smecher neted pentru lemn esenta moale cu partea activa asupra lemnului
  • Freza tablie mobila 45 mm HSS cu un profil smecher neted pentru lemn esenta moale cu partea activa sub lemn
  • Freza pentru tablie usi cu adancime de 55 mm pentru esenta moale si tare cu profil usor rotund simplu de slefuit, freza avand rotatie spre stanga
1 5

Wood Panel Router Bit D160 - D200 | Profile Code - M012-11 | DS Steel

Wood Panel Router Bit D160 - D200 | Profile Code - M012-11 | DS Steel

M012-41R-d32

485,00 RON
485,00 RON
Sale Sold out
Taxes included. Shipping calculated at checkout.
Diameter (D) x Position

Low stock: 1 left

Raised Panel Cutter – DS Steel | DIY

Profiled router bit for creating raised panels on a stationary table router. Frequently used in the production of solid wood doors (central panel), furniture with raised panels (cabinet fronts, drawers, interior doors with decorative panels). Available in two model positioning variants – above the wood or below the wood – selectable directly from the product page.

Product Type Product TypeProfiled cutter for mobile raised panels
Milling Profile Milling ProfileClassic/traditional model – see attached technical drawing
Model Positioning Variants Model Positioning VariantsSelect from menu: above the wood OR below the wood variant
Blade Material Blade MaterialDS Steel (standard high-speed steel)
Outer Diameter (D) Outer Diameter (D)160 mm or 200 mm – select from menu
Active Working Area Active Working AreaSee attached technical drawing
Number of Teeth / Blades Number of Teeth / BladesZ4 (4 active profiled, brazed inserts)
Construction Type Construction TypeBrazed inserts with brass alloy (Cu-Zn), resharpenable, without disassembly
Shaft Bore (d) Shaft Bore (d)Ø32 mm standard | Ø30 mm – reduction bush not included, purchased separately | Ø35 mm or Ø40 mm available for pre-order
Recommended Speed Recommended Speed6,000 RPM
Estimated Yield Estimated YieldUp to 3,000 linear meters in soft wood (between resharpening cycles)
Package Contents Package Contents1 x Cutter (variant selected from the menu)
Country of Origin Country of OriginUkraine

🚀 PROPERTIES AND PERFORMANCE:

  • Robust and Balanced Body: made of heat-treated steel, the tool body eliminates vibrations, protecting machine bearings and ensuring smooth finishes.
  • Professional Z4 Configuration: the 4 active cutting edges uniformly distribute the cutting force, allowing for constant feed without material tear-out, even in knotty areas.
  • Durable Brazing: the inserts are fixed with brass alloy (Cu-Zn), which withstands high torsional forces during deep profiling.
  • Resharpenable: the generous tooth profile allows for repeated resharpening, reducing long-term maintenance costs.
  • Dual Model Orientation: choosing the "above the wood" or "below the wood" variant allows adaptation to the type of machine and preferred working method.

💡 How to choose model orientation:
– Above the wood – visually control the profile during milling; recommended for manual work with controlled overhead feed.
– Below the wood – sawdust and chips are thrown directly downwards; the workpiece finish remains protected while sliding on the router table.

⚠️ LIMITATIONS IN USE (DS STEEL):

  • Purpose: recommended exclusively for soft to medium natural solid wood.
  • Not recommended for Composites: ❌ NOT recommended for use on chipboard, MDF, HDF, exotic wood, or derivative panels with abrasive adhesive!
  • Hardwood (oak, beech): DS Steel blade wear is significantly faster than on softwoods — resharpening will be more frequent.

📊 COMPATIBILITY RATING BY MATERIAL TYPE (DS STEEL)

Softwood (Spruce, Fir, Pine) 90%

Very good: clean cut, pleasant finish, ideal for DIY projects.
Medium Wood (Cherry, Walnut, Linden) 65%

Acceptable: good results, with more frequent resharpening.
Hardwood (Beech, Oak, Ash) 40%

Rapid blade wear — frequent resharpening increases maintenance costs.
Chipboard / MDF / HDF / Plywood Not Recommended

Synthetic binder prematurely wears out the DS Steel blade.

🦺 SAFETY MEASURES IN USE:

  • Mandatory protective equipment: safety glasses (against projected chips), mask or respirator filter (fine wood dust), and ear protection for prolonged work.
  • Beware of hands and fingers: always use a feed/push device; do not guide the workpiece manually with hands near the cutter.
  • Check cutter orientation before starting the machine – the "above" and "below the wood" variants are not interchangeable; incorrect mounting produces an incorrect profile.
  • Check cutter fixation on the shaft and complete tightening of the nut before starting.
  • Observe the recommended speed of 6,000 RPM – exceeding it increases the risk of vibrations and blade damage.
View full details