• Set 2 freze pentru baghete și cornișe, 22 mm, HSS brazat, alezaj 30 mm – precizie și finisaj profesional în prelucrarea lemnului.
  • Freze profilate pentru baghetă și cornișă, 22 mm, HSS, set 2 buc., compatibile cu mașini de frezat cu alezaj 30 mm.
1 2

Set of 2 Router Bits for Beadings / Cornices – 25 mm | Code - 01.25P1 | HSS Premium

Set of 2 Router Bits for Beadings / Cornices – 25 mm | Code - 01.25P1 | HSS Premium

01.25P1-d32

640,00 RON
640,00 RON
Sale Sold out
Taxes included. Shipping calculated at checkout.

Out of stock

Molding Cutter Set – Premium HSS M2

Profiled cutter set for creating classic moldings on solid wood – the smooth and precise profile obtained is ideal for mirror frames, door casings, decorative elements of classic furniture, or any application where refinement matters. The HSS M2 cutting edge leaves the surface perfectly smooth after milling, ready for stain or lacquer, significantly reducing manual sanding time.

Outer Diameter (D) Outer Diameter (D)120 mm
Active Working Space Active Working Space25 mm
Bore (d) Bore (d)Ø32 mm standard + Ø30 mm – reduction bush | Ø35 mm or Ø40 mm available for pre-order
Blade Material Blade MaterialPremium HSS M2 (6.5% Tungsten), brazed with silver alloy (Ag)
Number of Teeth / Inserts Number of Teeth / Inserts4 brazed inserts
Blade Hardness Blade Hardness64 – 66 HRC
Recommended Speed Recommended Speed9,000 RPM
Estimated Yield Estimated YieldUp to 3,000 linear meters (in softwoods, before first sharpening)
Cutting Inserts Cutting InsertsBrazed, successively resharpenable at a specialized center; in case of advanced wear, the cutter body can be re-brazed
Set Configuration Set Configuration2 cutters
Country of Origin Country of OriginUkraine

🚀 PROPERTIES AND PERFORMANCE:

  • Classic Molding Profile: precise and fluid geometry, ideal for frames, casings, decorative elements of classic furniture, and any application requiring an elegant and well-proportioned profile.
  • Finish Directly from Milling: the HSS M2 cutting edge leaves the surface smooth and ready for stain or lacquer – significantly reduced sanding time compared to standard cutters.
  • HSS M2 Cutting Edge Brazed with Silver (Ag): high mechanical resistance to impacts, without the risk of burning wood fibers, even with more demanding wood species.
  • Suitable for Table Routers and Hobby CNC: optimized geometry for controlled, manual or mechanized feed.
  • Long-Term Investment: inserts can be successively resharpened at a specialized center, and in case of advanced wear, the cutter body can be re-brazed with new inserts.

⚠️ USAGE LIMITATIONS (HSS M2 VERSION):

  • Exclusive Use: this version is intended exclusively for processing natural solid wood.
  • Not Recommended for Composites: ❌ NOT recommended for use on particleboard, MDF, HDF, or exotic wood! The synthetic binder prematurely wears the high-speed steel cutting edge.
  • Correct Alternative: for engineered wood products or very hard wood species, request the version with T.C.T. carbide inserts.

📊 COMPATIBILITY LEVEL BY MATERIAL TYPE (HSS M2)

Softwood (Spruce, Fir, Pine) 100%

Excellent: impeccable finish, no burns, surface ready for direct varnishing.
Hardwood (Beech, Oak, Ash) 80%

Good: efficient results, blade wear is faster than on softwoods.
Particleboard / MDF / HDF / Plywood Not Recommended

The synthetic binder prematurely wears the HSS cutting edge.

💡 For constant processing of hardwoods or engineered wood panels, the equivalent version with T.C.T. carbide inserts is also available.

🦺 SAFETY PRECAUTIONS:

  • Mandatory protective equipment: safety glasses (against projected chips), mask or respirator (fine wood dust), and earmuffs for prolonged work.
  • Attention to hands and fingers: maintain a safe distance from the cutting area and use push devices/sticks where possible; do not manually intervene near the moving cutter.
  • Check the cutter's fixation on the spindle and the complete tightening of the nut before starting the machine.
  • Respect the recommended speed of 9,000 RPM, to avoid vibrations or the risk of blade breakage.
  • Resharpening: we recommend resharpening at a specialized center to maintain the original cutting angle of the blade.
View full details