• Set Freze lambriu cu profil rotund la imbinare canal de 10 mm cu grosime 28 mm brazate cu hss
  • Set freze pentru lambriu cu profil rotund 14-25 mm si soft line de 10 mm cu imbinare conica pentru masina de frezat clasica cu alezaj de 30 mm
1 2

Set of 2 Round Panel Milling Cutters 14 - 25 mm | Code 14.00UR | HSS Premium

Set of 2 Round Panel Milling Cutters 14 - 25 mm | Code 14.00UR | HSS Premium

14.00UR-d30

566,00 RON
700,00 RON 566,00 RON
Sale Sold out
Taxes included. Shipping calculated at checkout.
Bore (d)

Low stock: 3 left

R8 Round Profile Paneling Router Bit Set with Conical Joint (14–25 mm) | HSS M2 Premium

Set of 2 profile router bits for creating paneling with an R8 round profile and a conical joint — when two adjacent boards are installed, a visible gap of ~10 mm is formed between them, characteristic of modern spaced paneling styles. The profile is self-adapting for wood thicknesses between 14–25 mm, adjustable solely by the machine spindle height, without spacer rings. Available in versions for classic spindle moulders (D130, d30) and for four-sided planers (D160, d40).

Outer Diameter (D) Outer Diameter (D)Ø130 mm (spindle moulder, d30) | Ø160 mm (4-sided planer, d40) – select from menu
Active Working Space Active Working Space14–20 mm (recommended) – self-adapting from spindle height, without spacer rings. Total router bit thickness 28 mm, fixed straight part at top 3 mm. Can be used over the entire active surface.
Joint Geometry Joint GeometryR8 Round profile with conical joint – when assembled, a visible gap of ~10 mm is formed between 2 adjacent boards
Bore (d) Bore (d)Ø30 mm standard (D130) | Ø40 mm standard (D160) | Ø35 mm or other sizes – upon request
Number of Teeth / Inserts Number of TeethZ4 (D130) | Z6 (D160, optimized for fast feed on 4 sides)
Blade Material Blade MaterialHSS M2 Premium (6.5% Tungsten), brazed with silver alloy (Ag) | 64–66 HRC
Recommended RPM Recommended RPM9,000 RPM
Estimated Yield Estimated YieldUp to 3,000 linear meters (in softwoods, before first resharpening)
Cutting Inserts Cutting InsertsBrazed, successively resharpenable; with advanced wear, the router bit body can be re-brazed
Set Configuration Set Configuration2 brazed monoblock router bits (male + female profile, structurally correlated)
Country of Origin Country of OriginUkraine

📐 SELECTION GUIDE – WHICH VARIANT TO CHOOSE:

  • D130 mm / d30 / Z4 – Classic Spindle Moulder: the standard variant for single-spindle moulders. Ø30 mm bore standard; Ø35 mm or Ø40 mm on request.
  • D160 mm / d40 / Z6 – 4-Sided Planers: the larger diameter and 6 teeth are calculated for the industrial speeds and feeds of 4-sided planers. Ø40 mm bore standard.
  • Self-Adapting 14–20 mm: you do not need spacer rings — adjust solely by the machine spindle height for any board thickness within the working range.
  • Extended Lip on Female Router Bit: allows paneling to be fixed with clamps or nails directly to the structure — convenient, fast, and secure. The conical joint with free space under the nail prevents clogging due to dust or chips.

🚀 PROPERTIES AND PERFORMANCE:

  • Visible Gap of ~10 mm at Joint: the conical profile of the router bit creates a regular visible gap of ~10 mm when two adjacent boards are installed — characteristic of modern spaced paneling styles, with a precise and uniform geometric appearance across the entire surface.
  • Finish Directly Ready for Varnishing: the HSS M2 cutting edge at 9,000 RPM leaves a smooth, clean surface, without burns or fiber tear-out — even with knotty wood.
  • CNC Dynamic Balancing: the router bit body is computer-machined for minimal idle vibrations, protecting the machine spindle and bearings.
  • Long-Term Investment: inserts can be successively resharpened; with advanced wear, the router bit body can be re-brazed with new inserts.

⚠️ LIMITATIONS IN USE (HSS M2):

  • Exclusive Use – Natural Solid Wood: ❌ NOT recommended for use on particleboard, MDF, HDF, or very hard exotic wood! The synthetic binder prematurely wears out the high-speed steel cutting edge.
  • Exotic or Very Hard Woods: for high-density woods, HSS cutting edge wear is faster — resharpening will be more frequent.

📊 COMPATIBILITY GRADE BY MATERIAL TYPE (HSS M2)

Softwood (Spruce, Fir, Pine, Linden) 100%

Excellent: immaculate white finish, no burns – the ideal choice for spruce, fir, or pine paneling.
Hardwood (Beech, Oak, Ash) 80%

Good: efficient results, cutting edge wear is faster than on softwoods.
Exotic / Very Dense Wood 50%

Acceptable: accelerated cutting edge wear, more frequent resharpening needed.
Particleboard / MDF / HDF / Laminated Not Recommended

The synthetic binder prematurely wears out the HSS cutting edge.

🦺 SAFETY MEASURES IN USE:

  • Mandatory protective equipment: safety glasses (against projected chips), mask or respirator filter (fine wood dust), and ear protection for prolonged work.
  • Attention to hands and fingers: when processing long paneling boards, use pushers and guides; do not guide the workpiece by hand near the router bit.
  • Check the fastening of the router bits on the spindle and the complete tightening of the nut before starting the machine.
  • Observe the recommended RPM (9,000 RPM) to avoid vibrations or damage to the cutting edge.
  • Resharpening: we recommend having it done at a specialized center to maintain the original geometry of the conical profile.
View full details