• Freza tablie mobila 45 mm HSS cu un profil absolut semirotunjit neted cu raza 40 mm cu partea activa sub lemn
  • Freza tablie mobila 45 mm HSS cu un profil absolut semirotunjit neted cu raza 40 mm
  • Freza tablie mobila 45 mm HSS cu un profil absolut semirotunjit neted cu raza 40 mm cu partea activa asupra lemnului
  • Freza diamentru 200 mm pentru tablie usi cu un profil siplu si neted cu partea activa deasupra scandurei cu raza de 20 mm
  • Freza diamentru 200 mm pentru tablie usi cu un profil siplu si neted cu partea activa sub scandura cu raza de 20 mm
1 5

Router Bit for Wood Panels D160 - D200 | Profile Code - M012-6 | DS Steel

Router Bit for Wood Panels D160 - D200 | Profile Code - M012-6 | DS Steel

M012-56L-d32

366,00 RON
366,00 RON
Sale Sold out
Taxes included. Shipping calculated at checkout.
Diameter (D) x Position

Low stock: 1 left

Raised Panel Cutter – DS Steel | DIY

Profile router bit for making raised panels on a stationary router table. Frequently used in the production of solid wood doors (central panel), furniture with raised panels (cabinet fronts, drawers, interior doors with decorative panels). Available in two model positioning variants – above the wood or below the wood – selectable directly from the product page.

Product Type Product TypeProfile router bit for making movable raised panels
Routing Profile Routing ProfileClassic/traditional model – see attached technical drawing
Model Positioning Variants Model Positioning VariantsSelect from the menu: above the wood OR below the wood variant
Cutting Edge Material Cutting Edge MaterialDS Steel (standard high-speed steel)
Outer Diameter (D) Outer Diameter (D)160 mm or 200 mm – select from menu
Active Working Space Active Working SpaceSee attached technical drawing
Number of Teeth / Cutting Edges Number of Teeth / Cutting EdgesZ4 (4 active profiled, brazed inserts)
Construction Type Construction TypeBrazed inserts with brass alloy (Cu-Zn), resharpenable, without disassembly
Bore Diameter AX (d) Bore Diameter AX (d)Ø32 mm standard | Ø30 mm – reduction bush not included, purchased separately | Ø35 mm or Ø40 mm available for pre-order
Recommended Speed Recommended Speed6,000 RPM
Estimated Yield Estimated YieldUp to 3,000 linear meters in softwood (between sharpening cycles)
Package Contents Package Contents1 x Router Bit (variant selected from the menu)
Country of Origin Country of OriginUkraine

🚀 PROPERTIES AND PERFORMANCE:

  • Robust and Balanced Body: made of heat-treated steel, the tool body eliminates vibrations, protecting machine bearings and ensuring flat finishes.
  • Professional Z4 Configuration: the 4 active cutting edges evenly distribute the cutting force, allowing for constant feed, without tear-out, even in areas with knots.
  • Durable Brazing: the inserts are fixed with brass alloy (Cu-Zn), which withstands high torsional forces during deep profiling.
  • Resharpenable: the generous tooth profile allows for repeated sharpening, reducing long-term maintenance costs.
  • Dual Model Orientation: choosing the above or below wood variant allows adaptation to the type of machine and preferred working method.

💡 How to choose model orientation:
– Above the wood – visually control the profile during routing; recommended for manual work with controlled overhead feed.
– Below the wood – sawdust and chips are ejected directly downwards; the workpiece finish remains protected while sliding on the router table.

⚠️ LIMITATIONS IN USE (DS STEEL):

  • Purpose: recommended exclusively for soft or medium natural solid wood.
  • Not recommended for Composites: ❌ NOT recommended for use on particleboard, MDF, HDF, exotic wood, or derivative panels with abrasive adhesive!
  • Hardwood (oak, beech): DS Steel cutting edge wear is significantly faster than on softwoods — sharpening will be more frequent.

📊 COMPATIBILITY GRADE BY MATERIAL TYPE (DS STEEL)

Softwood (Spruce, Fir, Pine) 90%

Very good: clean cut, pleasant finish, ideal for DIY projects.
Medium Wood (Cherry, Walnut, Linden) 65%

Acceptable: good results, with more frequent sharpening.
Hardwood (Beech, Oak, Ash) 40%

Rapid cutting edge wear — frequent sharpening increases maintenance costs.
Particleboard / MDF / HDF / Plywood Not Recommended

Synthetic binder prematurely wears out the DS Steel cutting edge.

🦺 SAFETY MEASURES IN USE:

  • Mandatory protective equipment: safety glasses (against projected chips), mask or respirator (fine wood dust), and ear protection for prolonged work.
  • Hand and finger safety: always use a push stick/feeder; do not manually guide the workpiece with your hands near the router bit.
  • Check the router bit orientation before starting the machine – the "above" and "below wood" variants are not interchangeable; incorrect mounting produces an incorrect profile.
  • Check the bit's fastening on the spindle and the nut's complete tightening before starting.
  • Observe the recommended speed of 6,000 RPM – exceeding it increases the risk of vibrations and cutting edge damage.
View full details