1 2

Jigsaw Blade for Wood 100×75 mm – HCS 10 TPI Down-Cut | ROTOR RT101BR

Jigsaw Blade for Wood 100×75 mm – HCS 10 TPI Down-Cut | ROTOR RT101BR

14762

5,00 RON
5,00 RON
Sale Sold out
Taxes included. Shipping calculated at checkout.

Low stock: 10 left

Jigsaw Blade for Wood 100×75 mm – HCS 10 TPI | ROTOR RT101BR

Set of 2 jigsaw blades made of high carbon steel (HCS), 10 TPI, with universal T-Shank fitting. The teeth are reverse-oriented (towards the shank) and cut on the downstroke – ideal profile for situations where you are cutting the workpiece with the visible side facing up. The blade presses the fibers on the downstroke, leaving the top surface intact and clean, while any chipping only appears on the back of the workpiece. Total length 100 mm, working length 75 mm, effective cutting capacity approx. 55–65 mm.

Total / Working Length Length100 mm / 75 mm
Material MaterialHCS – high-quality carbon steel
Teeth Teeth10 TPI
Geometry GeometryReverse-oriented teeth (towards the shank) – cuts on the downstroke, clean top surface
Shank ShankUniversal T-Shank
Contents Contents2 blades | Manufacturer: ROTOR

✨ ADVANTAGES:

  • When to Use: when you cannot turn the workpiece – for example, an already installed countertop, laid flooring, or a piece too large to flip. Reverse-oriented teeth cut on the downstroke and leave the bottom face clean, without chipping.
  • Complement to RT101B: RT101B for normal use (visible face up), RT101BR when a clean cut is needed on the bottom face without turning the workpiece.
  • Universal T-Shank: quick mounting on Bosch, DeWalt, Makita, Metabo, Milwaukee, and others.

⚠️ CAUTION:

  • ❌ Exclusively for wood and wood-based materials – do not cut metal, plaster, or abrasive materials.
  • For normal cuts where you can turn the workpiece, use RT101B – it's simpler to work with.

📊 MATERIAL COMPATIBILITY

Softwood Spruce, Fir, Pine★★★★★
Particleboard / Plywood / MDF★★★★☆
Hardwood Oak, Beech – faster wear★★★☆☆
Metal / Plaster / Abrasives✗ Not Recommended
View full details