1 2

Jigsaw Blade for Wood 100×75 mm – HCS 8 TPI Fast Cut | ROTOR RT111C

Jigsaw Blade for Wood 100×75 mm – HCS 8 TPI Fast Cut | ROTOR RT111C

14764

3,10 RON
3,10 RON
Sale Sold out
Taxes included. Shipping calculated at checkout.

Low stock: 10 left

Wood Jigsaw Blade 100×75 mm – HCS 8 TPI Fast Cut | ROTOR RT111C

Set of 2 jigsaw blades made of high carbon steel (HCS), 8 TPI, with universal T-Shank fitting. With widely spaced, large, set (alternately bent left-right) and milled teeth, the RT111C is exclusively optimized for very fast and coarse cuts in solid wood, beams, particleboard, and plywood. The teeth allow for quick sawdust evacuation, preventing the blade from jamming in thick materials. Cutting is performed on the upstroke. Total length 100 mm, working length 75 mm, optimal capacity 4–50 mm.

Total / Working Length Length100 mm / 75 mm
Cutting Capacity Capacity4–50 mm
Material MaterialHCS – high-quality high carbon steel
Teeth Teeth8 TPI – widely spaced, large, set and milled teeth
Geometry GeometryUp-cut – maximum speed, fast sawdust evacuation
Shank ShankUniversal T-Shank
Content Content2 blades | Manufacturer: ROTOR

✨ ADVANTAGES:

  • 8 TPI – Construction Site Speed: widely spaced teeth leave large gaps for quick sawdust evacuation – aggressive feed without jamming, even in thick materials or high-moisture wood.
  • Set and Milled Teeth: wider kerf than the blade body, no side friction and no overheating during long cuts.
  • Ideal for Construction Sites: fast cutting of beams, thick planks, OSB, raw particleboard, or any situation where speed matters more than edge finish.
  • Universal T-Shank: quick mounting on Bosch, DeWalt, Makita, Metabo, Milwaukee, and others.

⚠️ CAUTION:

  • ❌ Do not cut metal or abrasive materials – exclusively for solid wood, particleboard, plywood, and wood-based materials.
  • 8 TPI = maximum speed, coarse edge – for a clean finish, use RT101B (10 TPI) or RT101BR.

📊 MATERIAL COMPATIBILITY

Softwood / Beams / OSB Spruce, Fir, Pine – fast cutting★★★★★
Raw Particleboard / Thick Plywood★★★★★
Hardwood Oak, Beech – slower feed★★★☆☆
Melamine-faced Particleboard / Fine Finish⚠️ Coarse edge
Metal / Plasterboard / Abrasives✗ Not recommended
View full details