1 2

Reversible Blade for Electric Planer 110 mm – HSS / T.C.T. Tungsten Carbide | 110 mm | Set of 2

Reversible Blade for Electric Planer 110 mm – HSS / T.C.T. Tungsten Carbide | 110 mm | Set of 2

14405

12,50 RON
12,50 RON
12,50 RON each
Sale Sold out
Taxes included. Shipping calculated at checkout.
Material

11 in stock

Reversible Blades for 110 mm Electric Planer – HSS or T.C.T. Carbide | 6×1 mm | Set of 2 | ROTOR

Set of 2 reversible blades for 110 mm electric planers, size 110×6×1 mm, available in two material variants — HSS (high-speed steel) or T.C.T. Carbide (tungsten carbide) — selectable from the menu. Each blade has two active cutting edges: when the first edge wears out, flip the blade 180° and continue working with a perfectly new cutting edge. Compatible with 110 mm electric planers using a thin reversible blade system.

Length × Width × Thickness Dimensions110 × 6 × 1 mm
Blade Type Blade TypeDouble / Reversible (Double-Sided) – 2 active cutting edges per blade
Cutting Edge Material MaterialHSS – High-Speed Steel | T.C.T. Carbide – Tungsten Carbide – select from menu
Cutting Angle Cutting Angle40°
Compatibility Compatibility110 mm electric planers with thin reversible blade system
Contents Contents2 blades (selected variant from menu) | Manufacturer: ROTOR

✨ COMMON ADVANTAGES OF BOTH VARIANTS:

  • Reversible – 4 Total Cutting Edges: 2 blades × 2 sides = 4 active cutting edges per set. Doubled lifespan compared to single-sided blades.
  • 40° Angle – Impeccable Finish: flat and smooth surface after planing, without tearing fibers, ready for finishing.
  • 💡 Installation Tip: when turning or changing, ensure both blades are parallel in the drum guides and uniformly tightened — correct alignment for equal shavings across the entire 110 mm width.

🛠️ SELECTION GUIDE: HSS vs. T.C.T. CARBIDE

The choice of material directly influences the lifespan and the type of material processed (swipe left-right on mobile):

Material Processed HSS
High-Speed Steel 		T.C.T. Carbide ⭐
Tungsten Carbide
Softwood
Spruce, Fir, Pine 		⭐ Optimal
Perfect finish		 Works, low wear
Hardwood
Beech, Oak, Ash 		Good
Faster wear		 ⭐ Optimal
High resistance
MDF / Particleboard / Plywood ⚠️ Rapid wear
Abrasive binders		 ⭐ Recommended
Resists binders
Lifespan Standard 3–5× longer

💡 Conclusion: HSS for soft and medium solid wood; T.C.T. Carbide for hardwood, MDF, particleboard, and intensive production.

⚠️ CAUTION:

  • Verify that your 110 mm planer uses thin reversible blades — some 110 mm models use Single-Sided blades (1900B), which are incompatible with this set.
  • Always install both blades simultaneously — a single blade will unbalance the drum.
  • Do not use blades with nicks or damaged cutting edges — risk of breakage at high RPMs.
View full details