• Pânză circulară din oțel Pilana 400mm, model 56KV25 fără plăcuțe vidia, cu dinți triunghiulari ceaprăzuiți pentru debitare rapidă lemn.
1 2

Monometal Circular Saw Blade Pilana 400x30 mm, 56 Teeth, Set Teeth (Thicknesses 2-3 mm)

Monometal Circular Saw Blade Pilana 400x30 mm, 56 Teeth, Set Teeth (Thicknesses 2-3 mm)

P-400*2.0*30-Z56

225,00 RON
257,00 RON 225,00 RON
Sale Sold out
Taxes included. Shipping calculated at checkout.
Body Thickness

Low stock: 2 left

Pilana 400 mm Monometal Circular Saw Blade – 56 Set KV Teeth

Classic Pilana monometal blade, made from heat-treated alloy tool steel, with 56 set and sharpened KV teeth, without carbide tips. Designed for fast primary cutting of solid wood, firewood, and construction timber, on table saws, chop saws, or construction site machinery. Available in three body thickness variants, depending on machine power and cutting type.

Outer Diameter (D) Outer Diameter (D)400 mm
Bore (d) Bore (d)30 mm
Number of Teeth Number of Teeth56Z
Tooth Type / Geometry Tooth Type / GeometryKV – wolf tooth, set (alternately bent teeth), without carbide tips
Body Thickness (Variants) Body Thickness (Variants)2.0 mm / 2.5 mm / 3.0 mm – select from menu
Body Material Body MaterialAlloy tool steel, heat-treated (Pilana)
Construction Type Construction TypeMonometal – without brazed tips; resharpenable with file, re-settable with pliers
Cutting Type Cutting TypeCrosscut and Rip Cut – fast cutting, rough finish
Maximum Permissible Speed Maximum Permissible SpeedAccording to the marking on the blade body – do not exceed the indicated speed
Applications ApplicationsTable saws, chop saws, construction site machinery – firewood, timber, beams, rafters
Package Contents Package Contents1 x Circular saw blade (variant selected from menu)
Country of Origin Country of OriginCzech Republic (Pilana)

📐 SELECTION GUIDE: WHICH THICKNESS FOR WHICH MACHINE?

(swipe left-right on mobile to view full table)

Body Thickness Kerf Width
(estimated) 		Recommended Use
2.0 mm ~ 2.8 – 3.0 mm Fine cuts, minimal material loss, reduced motor strain. Suitable for single-phase saws.
2.5 mm ~ 3.3 – 3.5 mm Standard – optimal balance between stability and material loss. Most commonly used in workshops.
3.0 mm ~ 3.8 – 4.0 mm Heavy-duty – maximum stability for heavy cuts, no vibrations. Recommended for high-power three-phase saws.

* Kerf width is approximate and depends on the degree of tooth setting.

🚀 WHY CHOOSE A MONOMETAL BLADE:

  • Resistant to Impurities: monometal steel does not risk tip detachment upon contact with sand, residual mortar, extremely hard knots, or reclaimed wood – a clear advantage over TCT blades in harsh working conditions.
  • Set KV Tooth: alternately bent teeth create a wider kerf than the blade body, eliminating lateral friction and preventing binding in wet wood or thick beams.
  • Simple and Inexpensive Resharpening: can be resharpened with a file and re-set with pliers, without specialized centers or costly equipment – virtually unlimited lifespan.
  • Pilana Quality: alloy tool steel, heat-treated to maintain tooth sharpness under load; a brand with a tradition in producing blades for wood.

⚠️ USAGE LIMITATIONS:

  • Rough Finish: the resulting cut is rough, for dimensioning – requires planing or further processing where a fine surface is desired.
  • Particleboard / MDF / Melamine / Composites: ❌ not recommended – causes major chipping and rapid tooth wear.
  • 3.0 mm variant and small motors: thick body puts more strain on the motor – do not use the heavy-duty variant on low-power single-phase saws.

📊 COMPATIBILITY RATING BY MATERIAL TYPE (MONOMETAL KV)

Firewood / Logs / Wood with Impurities 100%
Excellent: the ideal choice where TCT blades would quickly deteriorate.
Softwood – Dimensioning (Spruce, Fir, Pine) 95%
Very good: fast and efficient cutting, rough dimensioning finish.
Hardwood – Dimensioning (Oak, Beech, Ash) 70%
Good: works, but the cutting edge wears faster; resharpening is more frequent.
Particleboard / MDF / Melamine / Composites Not Recommended
Major chipping of the surface layer, rapid tooth wear.

🦺 SAFETY MEASURES IN USE:

  • Mandatory protective equipment: safety glasses, mask or respirator (wood dust), earmuffs, and cut-resistant gloves when handling the blade.
  • Beware of kickback: ensure the splitter is correctly mounted and the blade guard is in position. Maintain a constant and controlled feed rate – blades without anti-kickback fingers are aggressive.
  • Securely fix the workpiece before cutting – an unfixed piece can be violently thrown.
  • 3.0 mm variant on large machines: at 400 mm diameter and thick body, centrifugal force is significant – do not exceed the maximum permissible speed marked on the blade body.
  • Check the condition of the teeth before use – uneven set, missing or cracked teeth can cause vibrations and kickback.
  • Check the direction of rotation when mounting.
  • For manual resharpening: wear gloves and safety glasses; maintain the original tooth angle when filing and re-set evenly to preserve cutting balance.
View full details