• Pânza circulară TCT CSN 225381-26, 350 x 3.6 x 30 mm, WZ-40 Z. Ideală pentru tăierea lemnului pe lungimea și transversal fibrei, oferind precizie și durabilitate.
  • Pânza circulară TCT CSN 225381-20 este proiectată special pentru tăierea transversală a fibrei lemnului, asigurând tăieturi precise, curate și uniforme.
  • Pânză TCT 350 mm, 72 dinți WZ, pentru tăiere transversală fină în lemn moale, tare și PAL brut.
1 3

Pilana Circular Saw Blade for Wood Cutting 350*30 mm – 40-72 teeth WZ

Pilana Circular Saw Blade for Wood Cutting 350*30 mm – 40-72 teeth WZ

P-350*3.6/2.5*30x40WZ

364,00 RON
364,00 RON
Sale Sold out
Taxes included. Shipping calculated at checkout.
Number of Teeth (z)

Low stock: 1 left

T.C.T. Circular Saw Blade 350 mm for Cross-Cutting – Wood / Chipboard

Professional T.C.T. (Tungsten Carbide Tipped) blade with WZ (alternate top bevel) tooth geometry, primarily designed for cross-cutting (cutting to length) in solid wood, raw chipboard, raw MDF, and plywood. Available in 3 tooth count variants – 40, 54, or 72 – to cover the entire range of applications, from fast cutting to fine finishing.

Outer Diameter (D) Outer Diameter (D)350 mm
Bore (d) Bore (d)30 mm | for a different arbor diameter, please contact us before ordering
Number of Teeth (Variants) Number of Teeth (Variants)40Z / 54Z / 72Z / 108Z – select from menu
Tooth Geometry Tooth GeometryWZ – alternate top bevel tooth (Wechselzahn), optimized for cross-cutting
Cutting Material Cutting MaterialT.C.T. Tungsten Carbide, brazed onto steel body
Main Cutting Type Main Cutting TypeCross-cutting (cutting to length) – WZ geometry is optimized for this direction
Maximum Permissible Speed Maximum Permissible SpeedAccording to the marking on the blade body – do not exceed the indicated speed
Applications ApplicationsStationary table saws, radial arm saws / miter saws (with arm)
Package Contents Package Contents1 x Circular saw blade (variant selected from menu)

📊 SELECTION GUIDE: WHICH VARIANT FOR WHICH JOB?

(swipe left-right on mobile to view the full table)

Variant Cross-cutting
(transverse) 		Ripping
(longitudinal) 		Recommended Materials
40 teeth (40Z)
Fast cutting 		✅ Good
(fast cutting) 		✅ Yes
(acceptable) 		Soft and hard solid wood, raw chipboard, beams, lumber
54 teeth (54Z)
Universal 		⭐ Very good ⚠️ Partially
(slower) 		Solid wood, raw chipboard, plywood, mixed applications
72 teeth (72Z)
Fine finish 		⭐ Excellent
(impeccable finish) 		❌ Not recommended
(overheating) 		Raw chipboard, raw MDF, plywood, solid wood for finishing
108 teeth (108Z)
Premium finish 		⭐ Premium
(mirror cut) 		❌ Forbidden
(guaranteed burning) 		Melamine-faced chipboard, finished MDF, quality plywood, laminated – where cut finish is critical

💡 Important to note: WZ geometry (alternate top bevel tooth) is designed for cross-cutting. For ripping (longitudinal), the 40Z variant offers acceptable results, but for intensive ripping, we recommend a blade with FZ geometry (flat top tooth), dedicated to this type of cut.

⚠️ USAGE LIMITATIONS:

  • Melamine-faced chipboard: possible fine chipping of the melamine layer at the entry or exit of the cut – for optimal results on melamine, use dedicated blades with negative hook angle or a double cutting guide.
  • Dense MDF / HDF: blade wear is faster than on solid wood or raw chipboard, due to density and abrasive adhesives. The 40Z variant is not recommended for MDF.
  • Intensive ripping (longitudinal): do not use the 72Z variant for ripping – fine teeth generate excessive heat in the longitudinal cut and can cause burns or deformation of the cut.

🦺 SAFETY MEASURES FOR USE:

  • Mandatory protective equipment: safety glasses, mask or respirator (wood / chipboard / MDF dust), ear protection, and cut-resistant gloves when handling the blade.
  • Beware of kickback: the main danger with circular saws. Do not force the feed, do not use a dull or worn blade, and ensure the splitter and guard are correctly installed.
  • Do not exceed the maximum permissible speed marked on the blade body – excessively high speed can cause the blade to break.
  • Check for correct installation: the direction of tooth rotation must match the direction of machine rotation; inverse installation causes violent kickback.
  • Do not use blades with cracked, missing teeth, or a deformed body – immediately replace worn or damaged blades.
  • Secure the workpiece before cutting – do not cut pieces held by hand without a guide or stop.
View full details