Freza tablie mobila 45 mm HSS cu spatiu de lucru 14 mm pentru lemn moale sau masiv cu un profil treptat cu rotunjire 6 mm cu partea activa sub lemn
Freza tablie mobila 45 mm HSS cu spatiu de lucru 14 mm pentru lemn moale sau masiv cu un profil treptat cu rotunjire 6 mm
Freza tablie mobila 45 mm HSS cu spatiu de lucru 14 mm pentru lemn moale sau masiv cu un profil treptat cu rotunjire 6 mm cu partea activa asupra lemnului
Freza tablie mobila 45 mm HSS cu spatiu de lucru 14 mm pentru lemn moale sau masiv cu un profil treptat cu rotunjire 6 mm cu partea activa sub lemn
Freza tablie mobila 45 mm HSS cu spatiu de lucru 14 mm pentru lemn moale sau masiv cu un profil treptat cu rotunjire 6 mm
Freza tablie mobila 45 mm HSS cu spatiu de lucru 14 mm pentru lemn moale sau masiv cu un profil treptat cu rotunjire 6 mm cu partea activa asupra lemnului

Note: actual product colours may vary slightly from the images, depending on monitor settings and photo lighting.

Vatzo

Wood Panel Raising Cutter D160 | Profile Code - M012-51 | DS Steel

SKU: M012-51L-d32
€47,77 incl. VAT
-37% €75,66 €47,77 incl. VAT
Only 5 left
Limited stock
Diameter (D) x Position
Free technical advice

Not sure which tool or accessory you need? Send us a photo, a sketch or your machine model – we'll help you choose.

Free delivery in Romania over 600 lei
100% secure payments
Professional quality

Got questions?

We're here to help

Ask a specialist!

Email +40 756 733 343

Raised Panel Cutter – DS Steel | DIY

Profiled router bit for creating raised panels on a stationary spindle moulder. Frequently used in the production of solid wood doors (central panel), paneled furniture (cabinet fronts, drawers, interior doors with decorative panels). Available in two model positioning variants – above the wood or below the wood – selectable directly from the product page.

Product Type Product TypeProfiled router bit for making movable panels
Milling Profile Milling ProfileClassic/traditional model – see attached technical drawing
Model Positioning Variants Model Positioning VariantsSelect from menu: above the wood OR below the wood variant
Cutting Edge Material Cutting Edge MaterialDS Steel (standard high-speed steel)
Outer Diameter (D) Outer Diameter (D)160 mm or 200 mm – select from menu
Active Working Space Active Working SpaceSee attached technical drawing
Number of Teeth / Edges Number of Teeth / EdgesZ4 (4 active profiled, brazed inserts)
Construction Type Construction TypeBrazed inserts with brass alloy (Cu-Zn), resharpenable, no disassembly required
Arbor Bore (d) Arbor Bore (d)Ø32 mm standard | Ø30 mm – reduction bush not included, purchased separately | Ø35 mm or Ø40 mm available for pre-order
Recommended RPM Recommended RPM6,000 RPM
Estimated Yield Estimated YieldUp to 3,000 linear meters in soft wood (between resharpening cycles)
Package Contents Package Contents1 x Router bit (variant selected from the menu)
Country of Origin Country of OriginUkraine

🚀 PROPERTIES AND PERFORMANCE:

  • Robust and Balanced Body: made of heat-treated steel, the tool body eliminates vibrations, protecting machine bearings and ensuring flat finishes.
  • Professional Z4 Configuration: the 4 active cutting edges evenly distribute the cutting force, allowing for consistent feed without tear-out, even in knotty areas.
  • Durable Brazing: the inserts are fixed with brass alloy (Cu-Zn), which withstands high torsional forces during deep profiling.
  • Resharpenable: the generous tooth profile allows for repeated resharpening, reducing long-term maintenance costs.
  • Dual Model Orientation: choosing the "above" or "below" the wood variant allows adaptation to the type of machine and preferred working method.

💡 How to choose model orientation:
– Above the wood – you visually control the profile during milling; recommended for manual work with controlled overhead feed.
– Below the wood – sawdust and chips are ejected directly downwards; the workpiece finish remains protected during sliding on the router table.

⚠️ LIMITATIONS IN USE (DS STEEL):

  • Purpose: recommended exclusively for soft or medium density natural solid wood.
  • Not Recommended for Composites: ❌ NOT recommended for use on chipboard, MDF, HDF, exotic wood, or derivative panels with abrasive adhesive!
  • Hardwood (oak, beech): DS Steel cutting edge wear is significantly faster than on softwoods — resharpening will be more frequent.

📊 COMPATIBILITY GRADE BY MATERIAL TYPE (DS STEEL)

Soft Wood (Fir, Spruce, Pine) 90%

Very good: clean cut, pleasant finish, ideal for DIY projects.
Medium Wood (Cherry, Walnut, Linden) 65%

Acceptable: good results, with more frequent resharpening.
Hard Wood (Beech, Oak, Ash) 40%

Rapid cutting edge wear — frequent resharpening increases maintenance costs.
Chipboard / MDF / HDF / Laminated Not Recommended

Synthetic binder prematurely wears out the DS Steel cutting edge.

🦺 SAFETY MEASURES IN USE:

  • Mandatory protective equipment: safety glasses (against flying chips), mask or respirator filter (fine wood dust) and earmuffs for prolonged work.
  • Hand and finger safety: always use a push stick/device; do not manually guide the workpiece with hands near the router bit.
  • Check the router bit orientation before starting the machine – the "above" and "below" the wood variants are not interchangeable; incorrect mounting produces an incorrect profile.
  • Check the router bit's secure fastening on the arbor and the complete tightening of the nut before starting.
  • Observe the recommended speed of 6,000 RPM – exceeding it increases the risk of vibrations and cutting edge damage.

Delivery in 24–48 working hours for in-stock products, by courier (Fan Courier, Sameday, Cargus, DPD, GLS).

Free delivery in Romania for orders over 600 lei. We also ship to the EU, Moldova and Ukraine – the cost is calculated at checkout. Details in our Shipping policy.

This product is covered by the legal guarantee of conformity of at least 2 years, under EU and Romanian law. If the product does not match its description or does not work as intended, you are entitled to free repair or replacement and, in some cases, a price reduction or refund.

See the EU notice on the legal guarantee · europa.eu/youreurope – guarantees

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Order several variants

Variant Quantity Price Total
Freza tablie mobila 45 mm HSS cu spatiu de lucru 14 mm pentru lemn moale sau masiv cu un profil treptat cu rotunjire 6 mm cu partea activa asupra lemnului
D160 – Above M012-51R-d32
€47,77 incl. VAT
€75,66 €47,77 incl. VAT
€0,00
Out of stock
€47,77 incl. VAT
€75,66 €47,77 incl. VAT
€0,00
Freza tablie mobila 45 mm HSS cu spatiu de lucru 14 mm pentru lemn moale sau masiv cu un profil treptat cu rotunjire 6 mm cu partea activa sub lemn
D160 – Under wood M012-51L-d32
€47,77 incl. VAT
€75,66 €47,77 incl. VAT
€0,00
€47,77 incl. VAT
€75,66 €47,77 incl. VAT
€0,00
View cart
0 Total items
€0,00

Product subtotal