Set 2 Freze Lambriu Profil Teșit cu Îmbinare Directă în V (30°)
Set 2 Freze Lambriu Profil Teșit cu Îmbinare Directă în V (30°)

Note: actual product colours may vary slightly from the images, depending on monitor settings and photo lighting.

SolGrat

Set of 2 Slanted Profile Tongue and Groove Router Bits 16 - 26 mm | Code 14.01UC | HSS M2

SKU: 14.01UC-d30
€131,07 incl. VAT
Only 1 left
Limited stock
Bore (d)
Free technical advice

Not sure which tool or accessory you need? Send us a photo, a sketch or your machine model – we'll help you choose.

Free delivery in Romania over 600 lei
100% secure payments
Professional quality

Got questions?

We're here to help

Ask a specialist!

Email +40 756 733 343

Set of 2 Chamfered Panel Milling Cutters with Direct V-Joint (30°) – HSS M2 | 16 – 26 mm

Professional set of 2 brazed monoblock HSS M2 cutters, designed for producing solid wood paneling with a chamfered (angled) profile and a direct 30° V-joint. Unlike the round profile, the chamfer creates a straight, geometric, angled line, and the two adjacent boards join directly at a 30° angle — without an intermediate gap, with continuous transition between panels.

Arbor Hole (d) Arbor Hole (d)Ø30 mm – for classic milling machines (stationary equipment) | Ø40 mm – for industrial 4-sided machines | other sizes by pre-order
Outer Diameter (D) Outer Diameter (D)According to the technical drawing of the selected variant
Construction Type / Teeth Construction Type / TeethZ4 – industrially brazed profiled teeth
Material Thickness (Working Space) Material Thickness16 – 26 mm – height-adjustable profile, adaptable for various board thicknesses
Joint Angle Joint Angle30° – direct V-joint, without intermediate gap
Set Configuration Set Configuration2 brazed monoblock cutters (profile and counter-profile structurally correlated)
Blade Material Blade MaterialHSS M2 (high-speed steel, 6.5% Tungsten), brazed
Blade Hardness Blade Hardness63 – 65 HRC
Recommended Speed Recommended Speed9,000 RPM
Estimated Yield Estimated YieldUp to 3,000 linear meters (on natural wood, before the first resharpening)
Blade Inserts Blade InsertsBrazed, successively resharpenable at a specialized center; in case of advanced wear, the cutter body can be re-brazed
Country of Origin Country of OriginUkraine

✨ KEY FEATURES AND ADVANTAGES:

  • Geometric, Modern Finish: the 30° chamfer creates a straight and angled line, appreciated in contemporary and minimalist interior design, unlike the classic appearance of the round profile.
  • Direct V-Joint: the two adjacent boards join at a continuous 30° angle, without a visible gap or intermediate space — a smooth transition between panels.
  • HSS M2 (6.5% Tungsten): hardness of 63–65 HRC, excellent resistance to high temperatures during cutting and completely eliminates the risk of fiber tear-out in knot areas.
  • Multi-Thickness 16–26 mm: thanks to the design with the straight cutting edge extended at the bottom, the cutters process different board thicknesses without structural modifications to the tool.
  • Long-Term Investment: the inserts can be successively resharpened, and in case of advanced wear, the cutter body can be re-brazed with new inserts.
💡 Simple adjustment, no additional rings: because the straight lower part of the profile is extended, it is NOT necessary to add rings or spacer washers to change the material thickness. Switching from a thinner to a thicker board (16–26 mm) is done exclusively by adjusting the height of the spindle, the 30° joint angle remaining constant and perfectly correlated on the panel face.

⚠️ LIMITATIONS IN USE (HSS M2):

  • Not Recommended for Composites: ❌ NOT recommended for use on chipboard, MDF, HDF or agglomerated materials – these exclusively require the HW (K40) variant.
  • Excellent on solid wood: spruce, fir, pine, linden, beech, oak, ash.

📊 COMPATIBILITY GRADE BY MATERIAL TYPE (HSS M2)

Softwood (Spruce, Fir, Pine, Linden) 100%

Excellent: immaculate white finish, no burns – the ideal choice for spruce, fir or pine paneling.
Hardwood (Beech, Oak, Ash) 80%

Good: efficient results, blade wear is faster than on softwoods.
Chipboard / MDF / HDF / Laminated Not Recommended

Synthetic binder prematurely wears HSS blades.

🦺 SAFETY PRECAUTIONS FOR USE:

  • Mandatory protective equipment: safety glasses (projected chips), mask or respirator filter (fine wood dust) and ear protection for prolonged work.
  • Beware of hands and fingers: when processing long paneling boards, use push sticks and guides; do not manually guide the workpiece near the cutter.
  • Check the securement of the cutters on the spindle and the complete tightening of the nut before starting.
  • Observe the recommended speed of 9,000 RPM.
  • Resharpening: we recommend performing it at a specialized center to maintain the original profile geometry and the 30° joint angle.

Delivery in 24–48 working hours for in-stock products, by courier (Fan Courier, Sameday, Cargus, DPD, GLS).

Free delivery in Romania for orders over 600 lei. We also ship to the EU, Moldova and Ukraine – the cost is calculated at checkout. Details in our Shipping policy.

This product is covered by the legal guarantee of conformity of at least 2 years, under EU and Romanian law. If the product does not match its description or does not work as intended, you are entitled to free repair or replacement and, in some cases, a price reduction or refund.

See the EU notice on the legal guarantee · europa.eu/youreurope – guarantees

Order several variants

Variant Quantity Price Total
Set 2 Freze Lambriu Profil Teșit cu Îmbinare Directă în V (30°)
30 mm 14.01UC-d30
€131,07 incl. VAT
€0,00
€131,07 incl. VAT
€0,00
40 mm 14.01UC-d40
€131,07 incl. VAT
€0,00
Out of stock
€131,07 incl. VAT
€0,00
View cart
0 Total items
€0,00

Product subtotal