Set freze lambriu profil rotund pentru lemn de 16 si 26 mm pentru lemn masiv sau molid, frasin, esenta moale
Set freze lambriu profil rotund pentru lemn de 16 si 26 mm pentru lemn masiv sau molid, frasin, esenta moale pe masina de frezat 4 fete
Set freze lambriu profil rotund pentru lemn de 16 si 26 mm pentru lemn masiv sau molid, frasin, esenta moale
Set freze lambriu profil rotund pentru lemn de 16 si 26 mm pentru lemn masiv sau molid, frasin, esenta moale pe masina de frezat 4 fete

Note: actual product colours may vary slightly from the images, depending on monitor settings and photo lighting.

SolGrat

Set of 2 Round Profile Tongue and Groove Router Bits 16 - 25 mm | Code 14.01UR | HSS M2

SKU: 14.01UR-d30
€105,08 incl. VAT
-20% €131,07 €105,08 incl. VAT
Only 3 left
Limited stock
Bore (d)
Free technical advice

Not sure which tool or accessory you need? Send us a photo, a sketch or your machine model – we'll help you choose.

Free delivery in Romania over 600 lei
100% secure payments
Professional quality

Got questions?

We're here to help

Ask a specialist!

Email +40 756 733 343

Set of 2 Round Profile Tongue and Groove Router Bits – HSS M2 | 16 – 25 mm

Professional set of 2 brazed HSS M2 solid-body router bits, designed for producing tongue and groove solid wood paneling with a classic rounded profile. The geometric configuration ensures perfectly matched male and female (tongue and groove) joints, guaranteeing a clean, tight, and uniform joint along the entire length of the processed panel.

Arbor Hole (d) Arbor Hole (d)Ø30 mm – for classic milling machines (stationary equipment) | Ø40 mm – for industrial 4-sided machines | other sizes available for pre-order
Outside Diameter (D) Outside Diameter (D)According to the technical drawing of the selected variant
Construction Type / Teeth Construction Type / TeethZ4 – industrially brazed profiled teeth
Material Thickness (Working Space) Material Thickness16 – 25 mm – height-adjustable profile, adaptable for various board thicknesses
Set Configuration Set Configuration2 solid-body brazed router bits (structurally correlated profile and counter-profile)
Cutting Material Cutting MaterialHSS M2 (high-speed steel, 6.5% Tungsten), brazed
Cutting Edge Hardness Cutting Edge Hardness63 – 65 HRC
Recommended RPM Recommended RPM9,000 RPM
Estimated Yield Estimated YieldUp to 3,000 linear meters (in natural wood, before the first resharpening)
Cutting Inserts Cutting InsertsBrazed, successively resharpenable at a specialized center; in case of advanced wear, the router bit body can be re-brazed
Country of Origin Country of OriginUkraine

✨ KEY FEATURES AND BENEFITS:

  • Elegant and Uniform Finish: creates a fine rounded profile, appreciated in rustic and Scandinavian design, or in premium solid wood interior decorations.
  • HSS M2 (6.5% Tungsten): 63–65 HRC hardness, excellent resistance to high temperatures during cutting, completely eliminates the risk of fiber tear-out in knotty areas.
  • Multi-Thickness 16–25 mm: thanks to the design with the straight cutting edge extended at the bottom, the router bits process different board thicknesses without structural modifications to the tool.
  • Long-Term Investment: the inserts can be successively resharpened, and in case of advanced wear, the router bit body can be re-brazed with new inserts.
💡 Simple adjustment, no additional rings needed: Since the lower straight part of the profile is extended, NO additional rings or spacer washers are required to change the material thickness. Switching from a thinner to a thicker board (16–25 mm) is done exclusively by adjusting the arbor height, with the rounded profile remaining perfectly proportionate on the panel face.

⚠️ USAGE LIMITATIONS (HSS M2):

  • Not Recommended for Composites: ❌ Not recommended for use on chipboard, MDF, HDF, or agglomerated materials – these require exclusively the HW (K40) variant.
  • Excellent for solid wood: spruce, fir, pine, linden, beech, oak, ash.

📊 COMPATIBILITY GRADE BY MATERIAL TYPE (HSS M2)

Soft Wood (Spruce, Fir, Pine, Linden) 100%

Excellent: pristine white finish, no burns – the ideal choice for spruce, fir, or pine paneling.
Hard Wood (Beech, Oak, Ash) 80%

Good: efficient results, but cutting edge wear is faster than on softwoods.
Chipboard / MDF / HDF / Laminated Not Recommended

The synthetic binder prematurely wears out the HSS cutting edge.

🦺 SAFETY MEASURES FOR USE:

  • Mandatory protective equipment: safety glasses (for chip projection), mask or respirator (fine wood dust), and ear protection for prolonged work.
  • Beware of hands and fingers: when processing long paneling boards, use push sticks and guides; do not guide the workpiece manually near the router bit.
  • Check the fastening of the router bits on the spindle and the full tightening of the nut before starting.
  • Respect the recommended speed of 9,000 RPM.
  • Resharpening: we recommend having it done at a specialized center to maintain the original profile geometry and cutting edge attack angle.

Delivery in 24–48 working hours for in-stock products, by courier (Fan Courier, Sameday, Cargus, DPD, GLS).

Free delivery in Romania for orders over 600 lei. We also ship to the EU, Moldova and Ukraine – the cost is calculated at checkout. Details in our Shipping policy.

This product is covered by the legal guarantee of conformity of at least 2 years, under EU and Romanian law. If the product does not match its description or does not work as intended, you are entitled to free repair or replacement and, in some cases, a price reduction or refund.

See the EU notice on the legal guarantee · europa.eu/youreurope – guarantees

Order several variants

Variant Quantity Price Total
Set freze lambriu profil rotund pentru lemn de 16 si 26 mm pentru lemn masiv sau molid, frasin, esenta moale
30 mm 14.01UR-d30
€105,08 incl. VAT
€131,07 €105,08 incl. VAT
€0,00
€105,08 incl. VAT
€131,07 €105,08 incl. VAT
€0,00
Set freze lambriu profil rotund pentru lemn de 16 si 26 mm pentru lemn masiv sau molid, frasin, esenta moale pe masina de frezat 4 fete
40 mm 14.01UR-d40
€131,07 incl. VAT
€0,00
€131,07 incl. VAT
€0,00
View cart
0 Total items
€0,00

Product subtotal