Pânza circulară TCT CSN 225381-26, 350 x 3.6 x 30 mm, WZ-40 Z. Ideală pentru tăierea lemnului pe lungimea și transversal fibrei, oferind precizie și durabilitate.
Pânza circulară TCT CSN 225381-20 este proiectată special pentru tăierea transversală a fibrei lemnului, asigurând tăieturi precise, curate și uniforme.
Pânză TCT 350 mm, 72 dinți WZ, pentru tăiere transversală fină în lemn moale, tare și PAL brut.
Pânza circulară TCT CSN 225381-26, 350 x 3.6 x 30 mm, WZ-40 Z. Ideală pentru tăierea lemnului pe lungimea și transversal fibrei, oferind precizie și durabilitate.
Pânza circulară TCT CSN 225381-20 este proiectată special pentru tăierea transversală a fibrei lemnului, asigurând tăieturi precise, curate și uniforme.
Pânză TCT 350 mm, 72 dinți WZ, pentru tăiere transversală fină în lemn moale, tare și PAL brut.

Note: actual product colours may vary slightly from the images, depending on monitor settings and photo lighting.

Pilana

Pilana Circular Saw Blade for Wood Cutting 350*30 mm – 40-72 teeth WZ

SKU: P-350*3.6/2.5*30x40WZ
€69,55 incl. VAT
Only 1 left
Limited stock
Number of Teeth (z)
Free technical advice

Not sure which tool or accessory you need? Send us a photo, a sketch or your machine model – we'll help you choose.

Free delivery in Romania over 600 lei
100% secure payments
Professional quality

Got questions?

We're here to help

Ask a specialist!

Email +40 756 733 343

T.C.T. Circular Saw Blade 350 mm for Cross-Cutting – Wood / Chipboard

Professional T.C.T. (Tungsten Carbide Tipped) blade with WZ (alternate top bevel) tooth geometry, primarily designed for cross-cutting (cutting to length) in solid wood, raw chipboard, raw MDF, and plywood. Available in 3 tooth count variants – 40, 54, or 72 – to cover the entire range of applications, from fast cutting to fine finishing.

Outer Diameter (D) Outer Diameter (D)350 mm
Bore (d) Bore (d)30 mm | for a different arbor diameter, please contact us before ordering
Number of Teeth (Variants) Number of Teeth (Variants)40Z / 54Z / 72Z / 108Z – select from menu
Tooth Geometry Tooth GeometryWZ – alternate top bevel tooth (Wechselzahn), optimized for cross-cutting
Cutting Material Cutting MaterialT.C.T. Tungsten Carbide, brazed onto steel body
Main Cutting Type Main Cutting TypeCross-cutting (cutting to length) – WZ geometry is optimized for this direction
Maximum Permissible Speed Maximum Permissible SpeedAccording to the marking on the blade body – do not exceed the indicated speed
Applications ApplicationsStationary table saws, radial arm saws / miter saws (with arm)
Package Contents Package Contents1 x Circular saw blade (variant selected from menu)

📊 SELECTION GUIDE: WHICH VARIANT FOR WHICH JOB?

(swipe left-right on mobile to view the full table)

Variant Cross-cutting
(transverse) 		Ripping
(longitudinal) 		Recommended Materials
40 teeth (40Z)
Fast cutting 		✅ Good
(fast cutting) 		✅ Yes
(acceptable) 		Soft and hard solid wood, raw chipboard, beams, lumber
54 teeth (54Z)
Universal 		⭐ Very good ⚠️ Partially
(slower) 		Solid wood, raw chipboard, plywood, mixed applications
72 teeth (72Z)
Fine finish 		⭐ Excellent
(impeccable finish) 		❌ Not recommended
(overheating) 		Raw chipboard, raw MDF, plywood, solid wood for finishing
108 teeth (108Z)
Premium finish 		⭐ Premium
(mirror cut) 		❌ Forbidden
(guaranteed burning) 		Melamine-faced chipboard, finished MDF, quality plywood, laminated – where cut finish is critical

💡 Important to note: WZ geometry (alternate top bevel tooth) is designed for cross-cutting. For ripping (longitudinal), the 40Z variant offers acceptable results, but for intensive ripping, we recommend a blade with FZ geometry (flat top tooth), dedicated to this type of cut.

⚠️ USAGE LIMITATIONS:

  • Melamine-faced chipboard: possible fine chipping of the melamine layer at the entry or exit of the cut – for optimal results on melamine, use dedicated blades with negative hook angle or a double cutting guide.
  • Dense MDF / HDF: blade wear is faster than on solid wood or raw chipboard, due to density and abrasive adhesives. The 40Z variant is not recommended for MDF.
  • Intensive ripping (longitudinal): do not use the 72Z variant for ripping – fine teeth generate excessive heat in the longitudinal cut and can cause burns or deformation of the cut.

🦺 SAFETY MEASURES FOR USE:

  • Mandatory protective equipment: safety glasses, mask or respirator (wood / chipboard / MDF dust), ear protection, and cut-resistant gloves when handling the blade.
  • Beware of kickback: the main danger with circular saws. Do not force the feed, do not use a dull or worn blade, and ensure the splitter and guard are correctly installed.
  • Do not exceed the maximum permissible speed marked on the blade body – excessively high speed can cause the blade to break.
  • Check for correct installation: the direction of tooth rotation must match the direction of machine rotation; inverse installation causes violent kickback.
  • Do not use blades with cracked, missing teeth, or a deformed body – immediately replace worn or damaged blades.
  • Secure the workpiece before cutting – do not cut pieces held by hand without a guide or stop.

Delivery in 24–48 working hours for in-stock products, by courier (Fan Courier, Sameday, Cargus, DPD, GLS).

Free delivery in Romania for orders over 600 lei. We also ship to the EU, Moldova and Ukraine – the cost is calculated at checkout. Details in our Shipping policy.

This product is covered by the legal guarantee of conformity of at least 2 years, under EU and Romanian law. If the product does not match its description or does not work as intended, you are entitled to free repair or replacement and, in some cases, a price reduction or refund.

See the EU notice on the legal guarantee · europa.eu/youreurope – guarantees

Order several variants

Variant Quantity Price Total
Pânza circulară TCT CSN 225381-26, 350 x 3.6 x 30 mm, WZ-40 Z. Ideală pentru tăierea lemnului pe lungimea și transversal fibrei, oferind precizie și durabilitate.
z40 P-350*3.6/2.5*30x40WZ
€69,55 incl. VAT
€0,00
€69,55 incl. VAT
€0,00
Pânza circulară TCT CSN 225381-20 este proiectată special pentru tăierea transversală a fibrei lemnului, asigurând tăieturi precise, curate și uniforme.
z54 P-350*3.6/2.5*30x54WZ
€88,84 incl. VAT
€101,45 €88,84 incl. VAT
€0,00
€88,84 incl. VAT
€101,45 €88,84 incl. VAT
€0,00
Pânză TCT 350 mm, 72 dinți WZ, pentru tăiere transversală fină în lemn moale, tare și PAL brut.
z72 P-350*3.6/2.5*30x72WZ
€91,14 incl. VAT
€0,00
€91,14 incl. VAT
€0,00
z108 P-350*3.6/2.5*30x108WZ
€103,94 incl. VAT
€118,65 €103,94 incl. VAT
€0,00
€103,94 incl. VAT
€118,65 €103,94 incl. VAT
€0,00
View cart
0 Total items
€0,00

Product subtotal