Knives for Planer Thicknesser 330 mm – HSS 211 | Set of 2 pcs | With Guide Holes

✨ ADVANTAGES:

• Guide Holes – Instant Alignment: knives position directly on the drum pins, no complicated manual calibration with magnetic jigs. Fast change, guaranteed millimeter-perfect alignment.
• HSS 211 – Optimized for Thicknessing: the alloy absorbs repeated mechanical shocks when processing rough beams and boards, resisting impact with hard knots without micro-chipping or dulling of the edge.
• Uniform Cut on 330 mm: precision grinding along the entire length of the knife ensures impeccable flatness across the full width of the wood, without streaks or unevenness.
• 💡 Workshop Tip: when changing knives, clean the guide pins and the drum housing of compacted resin and sawdust — any residue under the knife can create a small angle that spoils the flatness of the cut.

⚠️ CAUTION:

• Check compatibility before ordering – dimensions and position of guide holes vary between models. Confirm that your machine uses 330×16.5×2 mm knives with positioning pins.
• Always mount both knives simultaneously with uniform tightening — drum imbalance causes vibrations and uneven cuts.
• Do not use knives with chipped edges or deformities — risk of breakage at high speeds.

📊 COMPATIBILITY BY WOOD TYPE