TIREX 2200W Branch Shredder – Ø65 mm | Pilana DS Knife + Spare Knife Included
The TIREX branch shredder, made in Kharkiv (Ukraine), turns branches, vine prunings and garden wood waste into fine chips, ready for mulching or composting. Inside, a perfectly balanced rotating disc carries a short Pilana-type knife — the same design principle used on planer machines — which shaves the material on every revolution instead of tearing or jamming the branch. The result: stable, vibration-free operation, even with knotty branches.
| Manufacturer |
ManufacturerTIREX – Voloka, Chernivtsi, Ukraine (motor made in Kharkiv) |
| Motor Power |
Motor Power2200 W (2.2 kW) |
| Speed |
Speed2,897 RPM |
| Power Supply |
Power Supply230 V single-phase, 50 Hz |
| Shredding Diameter – Green Wood |
Green Wood Diameter5 – 65 mm |
| Shredding Diameter – Dry Wood |
Dry Wood Diameterup to 50 mm |
| Feed Opening |
Feed Opening70 × 70 mm |
| Chip Output Length |
Output Length5 – 15 mm |
| Throughput |
Throughput~100 kg/hour |
| Knife – Quantity |
Knife Quantity1 active knife fitted + 1 spare knife included (bonus)
|
| Knife – Material |
Knife MaterialPilana DS (Chrome Steel), 58–61 HRC |
| Knife – Thickness |
Knife Thickness3 mm |
| Dimensions (L×W×H) |
Dimensions400 × 500 × 780 mm |
| Weight |
Weight30 kg |
| Warranty |
Warranty24 months |
✨ WHAT MAKES TIREX DIFFERENT:
-
Balanced Disc – Zero Vibration: the internal disc is dynamically balanced, so the shredder stays stable on any ground, without jumping or shaking hard like cheap hammer-type models.
-
Pilana DS Knife, Not Generic Steel: the same type of knife used on professional planer machines — resharpenable, does not chip on knots, and cuts cleanly instead of crushing the fibre.
-
Spare Knife Included: you won't be stuck in the middle of the garden clean-up season — swap the dull knife in a few minutes and keep working.
-
2.2 kW Motor – No Jamming: enough power for green branches up to 65 mm without slowing down or stalling in the material.
-
Real Throughput: ~100 kg/hour — a whole season of orchard or vineyard clean-up, not just a weekend job.
🌳 SUITABLE MATERIALS:
Ideal for fruit tree branches, grapevine and garden shrubs, from 5 mm up to 65 mm when green (up to 50 mm when the wood is dry). Perfect for preparing material for mulching or composting — a professional-grade shredder designed for home use and intensive gardening.
⚠️ USAGE LIMITATIONS:
-
❌ Do NOT feed MDF, particleboard, plastic or other composite materials — the Pilana DS knife is designed for natural wood only; synthetic materials damage the cutting edge and can be dangerous when shredded.
-
Maximum diameter 65 mm (green) / 50 mm (dry): do not force thicker branches — the motor can overheat or jam.
🦺 SAFETY MEASURES:
-
❌ Do NOT wear gloves while working. It may seem counter-intuitive, but it is the correct advice for machines with a feed opening: a glove caught by the disc pulls the hand in with it. A bare hand that touches the danger zone reacts instinctively and pulls back — a glove does not.
-
Do not wear loose sleeves, scarves or dangling jewellery — anything that can catch on a branch and be pulled towards the feed opening (70×70 mm) must be strictly avoided.
-
Never put your hand into the feed opening to push a stuck branch — always use another branch or a stick to push the material.
-
Wear safety glasses — wood chips can fly out during shredding.
-
Wear hearing protection during extended use.
-
Tie back long hair and do not lean over the feed opening.
-
Switch off and unplug the machine before changing the knife or clearing jammed material.
-
Keep children and animals at a distance during operation.